Remember - Measure Twice, Cut Once

Professional Renovations - 30 Years Experience

Tint Your Plaster For Touch Ups on Primed Walls & Trim

If you are patching or filling holes, scratches or dents on primed white walls or trim it is a good idea to mix a little colour (paint tint) into the filler you are using. If you don’t, it is very easy to miss some of these spots when you are sanding and spot priming afterward.

Why is this important? Any areas that you have filled must be spot primed before you apply a finish coat of paint, if you do not prime these spots, they will show up as flat, dull spots on your finished walls and trim (even on low sheen finishes like eggshell). by adding colour to your filler you will be able to see all the spots you filled, sand them and spot prime them all – this applies to mouldings and any built-in woodwork as well.

Most lumber yards carry small tubes of paint tint that you can use. You won’t need much so just get a small tube. You can also buy coloured fillers at some stores but is much more expensive. If you are in a bind and cannot get the paint store, a very small amount of a deep coloured latex paint will work – paint tint is better though.

October 1, 2010 | Filed Under Drywalling, General, Painting | 1 Comment 

Do Not Use Pens, Felt Pens or Chalk Lines!

When you are doing your next drywall project, moulding installation, or any other project that will be visible in your home and painted… do not use any ink based marker (felt pens or ink pens) or chalk lines on any surface that will be visible on completion. These types of markers will bleed through latex primer and paint. Considering that 90% of paint used in homes today is latex, it is a safe bet you will be using latex paint as well.

Play it safe and only use pencils for marking out cut lines, holes and so on. Pencil marks will not bleed through latex paints

Read more

September 28, 2010 | Filed Under Do's & Don'ts, Drywalling, Painting | Leave a Comment 




  • My Favorite Magazines!

    When it comes to woodworking and home repairs, two magazines stand out from all the others, Fine Woodworking and Fine Homebuilding. I have collected these for years and always enjoy going back to old issues and checking out various projects and tips. The quality is high and you'll find these magazines feel more like book quality.

    Turning the pages of Fine Woodworking or Fine Homebuilding is like a kid in a candy store - so much cool stuff you just have to try. Over all I give these magazines a rating of 10/10 - some issues 9/10.

    Fine Woodworking

    Fine Homebuilding

    Don't buy these in the store, you can save over 30% using my links above (images) to grab a subscription.

  • NEW! Holmes Magazine

    If there is one guy who's opinion you can trust for construction and renovation advice it is Mike Holmes from Holmes on Homes. Now you can get his advice delivered right to your door with the launch of his new magazine!

    If you've been wondering where you can subscribe to his new magazine? Look no further, you can get a subscription right now for only $18.95 Cdn and save up to 52% off the newsstand price (6 issues). I got mine and am looking forward to the first issue. Visit HolmesMagazine.com to get yours today!